Article

Latest News
Comment on Win a Free b iPod /b by Ryan- Sunday, October 28, 2007
win a b ipod /b really doing nothing NOT A SCAM What Do u got to lose read more...

b iPod /b Song Downloads Involve Plenty Of Fun- Sunday, October 28, 2007
Getting b iPod /b song downloads is always challenging, as there are hundreds read more...

This is an ad produced by a student for the b iPod /b Touch. It has b ... /b- Sunday, October 28, 2007
This is an ad produced by a student for the b iPod /b Touch. It has prompted read more...


Latest Articles
Myspace Backgrounds
Time to get started on this topic. Take a few moments to read every aspect ...more

Blog Myspace
I hope that the following article will help you to better understand this ...more

LG shine: accentuate your lifestyle
Why mobile phones have once again become a status symbol? Its not hard to ...more

Cisco CCNP / BSCI Tutorial: Comparing OSPF and ISIS Hellos by Chris Bryant

While studying to pass the BSCI exam and preparing to earn your CCNP certification, you'll quickly notice that while OSPF and ISIS are both link-state protocols, there are a lot of differences between the two. One major difference is the way the two protocols handle hello packets.

Hello packets are imperative to keeping OSPF and ISIS adjacencies alive. Since they are both link-state protocols, neither of them will send updates at any specified time. Hello packets are the only method by which routers running OSPF and ISIS can see that a neighboring router is still available.

OSPF gives us some great options when it comes to keeping routing table size down via the use of stub and total stub areas, but to OSPF, a hello packet is a hello packet. ISIS routers are capable of sending two different types of hellos - Level 1 and Level 2.

ISIS routers are classified as Level 1 (L1), Level 2 (L2), and Level 1-2 (L1-L2). By default, Cisco routers are L1-L2 routers; this means that every ISIS-enabled interface will send out both L1 and L2 hellos.

If one of the interfaces is forming only an L1 or L2 adjacency, there's no reason to send out hellos for the other adjacency type. For example, if R1 is forming an L1 adjacency with R2 via its ethernet0 interface, there is no reason to allow the router to transmit L2 hellos. To hardcode a router interface to send only L1 or L2 hellos, use the isis circuit-type command.

R1(config)#interface ethernet0

R1(config-if)#isis circuit-type level-1

Note: To configure this interface to send only L2 hellos, the full command is "isis circuit-type level-2-only", not just "level-2".

This configuration would prevent L2 hellos from being transmitted out ethernet0. While this does save router resources and prevents unnecessary bandwidth usage, there is also no way an L2 adjacency can be formed - so double-check your network topology before using this command!

About the Author:
Chris Bryant, CCIE #12933, is the owner of The Bryant Advantage , home of free CCNA and CCNP tutorials! Pass the BSCI exam with Chris Bryant!


Other articles by Chris Bryant

Cisco CCNP / BSCI Certification: The Local Preference BGP Attribute
When studying for your BSCI exam for the CCNP, you get your first taste of BGP. One of the major differences between BGP and the other protocols you've studied to date is that BGP uses attributes to describe paths, and to influence the selection of one path over the other. In this free tutorial, ...more

Cisco CCNA Certification: Error Detection vs. Error Recovery
Passing the CCNA, Intro, and ICND exam is all about knowing and noticing the details. (Which makes perfect sense, since becoming a master networking administrator or engineer is also about noticing the details!) One such detail knows the difference between error detection and error recovery. While ...more

Cisco CCNA Certification: Cisco Switching Modes Tutorial
To pass the CCNA exam and earn that coveted certification, you've got to know Cisco switches inside and out. Among the many important details you've got to know are the three methods that Cisco switches use to forward frames, and the differences between the three. The first switching method is ...more

Cisco CCNP / BSCI Certification: The BGP Attribute "MED"
When you're preparing to pass the BSCI exam and earn your CCNP certification, one of the biggest challenges is learning BGP. BGP is totally different from any protocol you learned to earn your CCNA certification, and one of the differences is that BGP uses path attributes to favor one path over ...more

It's 2006. Do You Know Where Your IT Career Is?
Whether you're thinking of starting a career with computers and information technology, or thinking about earning a professional certification such as the CCNA or MCSE to accelerate your career, there is no better time to start than today. Silicon Valley is hiring again, and while we all can't work ...more